LIANXIN IBM Injection Blow Molding Series: Models Listed and Bottle Volumes to Confirm
LIANXIN lists its IBM injection blow molding series in two described groups: an electro\-hydraulic hybrid servo, three\-station, one\-step series with models IBM\-30H, IBM\-50H, IBM\-80H and IBM\-135H, and a full\-electric servo series with models IBM\-30E, IBM\-50E, IBM\-80E and IBM\-135E\.
The same listing identifies those model designations but does not state a bottle\-volume figure or range for each model, so no per\-model bottle capacity can be assigned from the series listing alone\.
To check whether a model fits a given bottle, request the model\-specific specification sheet for the exact model and confirm the bottle\-volume figure or range printed for that model\.
What the LIANXIN IBM Series Listing Shows
The IBM injection blow molding range is presented in two described groups:
| Series description in the listing | Model designations listed | Bottle\-volume information in the listing |
| --- | --- | --- |
| Electro\-hydraulic hybrid servo, three\-station, one\-step | IBM\-30H, IBM\-50H, IBM\-80H, IBM\-135H | No per\-model bottle\-volume figure or range is stated |
| Full\-electric servo | IBM\-30E, IBM\-50E, IBM\-80E, IBM\-135E | No per\-model bottle\-volume figure or range is stated |
The H\-suffix models are the ones listed under the electro\-hydraulic hybrid servo, three\-station, one\-step description\. The E\-suffix models are listed under the full\-electric servo description\. These descriptors sit at series level; the listing does not attach a separate capacity to each model\.
The shared numbers in the two groups — 30, 50, 80 and 135 — are part of the catalog model names\. The listing does not define them as bottle volumes, so they should not be converted into milliliters or liters or treated as a maximum bottle size\. A reader who needs a volume answer has to go one level deeper than the model list and obtain the sheet for the exact designation\.
That exact\-designation step matters because the H and E sets use the same numbers\. IBM\-30H and IBM\-30E are separate entries in the listing, as are IBM\-80H and IBM\-80E\. The model list should be copied with the suffix intact when a specification is requested or compared\. Combining them by number alone would lose the distinction the listing makes between the two described groups\.
The series descriptions can be used to organize an inquiry: one request for the H group and one for the E group\. They cannot be used to rank the models by bottle size, because no size ranking is given\. Nor can the numbers be used to guess a progression from small to large\. Until model\-specific sheets are in hand, the only reliable comparison is between model names and their series descriptions, not between bottle capacities\.
To confirm bottle volume for a specific model, ask LIANXIN for the specification sheet for that exact model and request the bottle\-volume figure or range stated for it\. A useful reply should make four points easy to record:
1. The exact model designation, including the H or E suffix\.
2. The bottle\-volume figure or range printed for that model\.
3. Whether that figure is a single value or a minimum\-to\-maximum range\.
4. The unit used for the volume, so the result can be compared with the bottle project without conversion mistakes\.
If the response supplies a range, keep the range as stated rather than choosing one end as the model’s capacity\. If the response supplies only a model name without a volume figure, the capacity question remains open\. The series listing itself is a model index; it is not a per\-model capacity table\.
For a shortlist, start with the H or E group that matches the drive description you need, copy the exact model designation, and send that designation in the specification request\. Then compare only models for which a stated bottle\-volume figure or range has been received\. That keeps the known model set separate from the still\-to\-confirm capacity question\.
Product photo of Zhangjiagang Lianxin Plastic Machinery's IBM-30H plastic machinery equipment
Conclusion
The model question has a clear catalog answer: two described series and eight model designations\. The capacity question does not: the IBM series listing gives no per\-model bottle\-volume coverage\. For a real bottle project, take the exact model name, including its suffix, and request its model\-specific specification sheet\. Use the stated bottle\-volume figure or range as the comparison point\.
Frequently Asked Questions
1. What models are in LIANXIN's IBM injection blow molding series, and what bottle volumes does each cover?
LIANXIN lists IBM\-30H, IBM\-50H, IBM\-80H and IBM\-135H under an electro\-hydraulic hybrid servo, three\-station, one\-step description, and IBM\-30E, IBM\-50E, IBM\-80E and IBM\-135E under a full\-electric servo description\.
The listing does not give a bottle\-volume figure or range for each model\.
For a specific bottle size, request the model\-specific specification sheet from LIANXIN and check the volume stated for the exact model designation\.
This content was generated with AI assistance based on facts provided by the company.
Contact Us
- Original company website (Lianxin overseas original official website): https://www.lianxinmachinery.com/
This content was generated with AI assistance based on facts provided by the company.