Lianxin IBM Machines: HDPE, LDPE, PP, PS and EVA Capability Check
Lianxin’s IBM line lists HDPE, LDPE, PE, PP, PS and EVA among processable materials, so the five named resins sit within its stated material coverage\.
That is line\-level coverage, not a model\-by\-model suitability guarantee; confirm the model and bottle specification before ordering\.
Does Lianxin’s IBM Line Cover These Five Resins?
Lianxin’s IBM injection blow molding machine line lists HDPE, LDPE, PE, PP, PS, EVA and other thermoplastic raw materials as processable materials\. This places HDPE, LDPE, PP, PS and EVA within the IBM line’s stated material coverage; PE also appears in the list alongside HDPE and LDPE\.
Lianxin manufactures three\-station one\-step injection blow molding machines and injection stretch blow molding equipment\. The IBM designation belongs to the injection blow molding line, and the material list above applies to that IBM category as a whole rather than to a named model\.
The catalog also lists packaging applications in pharmaceutical, food and dairy, cosmetics, personal care, daily chemicals, lubricants and specialty chemicals\. Those application areas show where the IBM machines are used, but they do not replace a bottle\-specific review\.
A material list answers a broad question: whether a resin family is named for the machine line\. It does not confirm the mold, cooling, cycle time or quality window for a particular bottle\.
For a specific project, confirm the resin grade, bottle specification and mold with Lianxin before selecting a machine\.
IBM Model Families and Per\-Model Fit
Lianxin’s IBM range has two series and one separate model: the IBM\-H electro\-hydraulic hybrid servo series \(IBM\-30H, IBM\-50H, IBM\-80H and IBM\-135H\); the IBM\-E all\-electric servo series \(IBM\-30E, IBM\-50E, IBM\-80E and IBM\-135E\); and the IBBM\-50E all\-electric horizontal four\-station injection blow molding machine\. The catalog also lists BPET\-70V4 and BPET\-125V4 one\-step four\-station injection stretch blow molding machines, but those are ISBM equipment, not IBM models\.
The IBM\-H series is described as using an electro\-hydraulic hybrid servo system, the IBM\-E series as all\-electric servo, and the IBBM\-50E as a horizontal four\-station all\-electric machine\. These are machine\-family descriptions, not material\-specific model approvals\.
The material list is given at line level, not as a model\-by\-model suitability chart\. A model choice still has to be matched to the resin, mold, shot weight, bottle shape and output requirement\.
The catalog’s application list covers pharmaceutical, food and dairy, cosmetics, personal care, daily chemicals, lubricants and specialty chemicals packaging\. That breadth shows the intended packaging markets, not a per\-model material approval\.
For a specific job, ask Lianxin to confirm which IBM model is proposed for the resin and bottle, and request the mold and process review for that combination\.
What the PS Medical Bottle Project Shows About Configuration
Lianxin undertook a PS pharmaceutical reagent bottle project for a US pharmaceutical packaging company’s India base\. The project used an IBM80E all\-electric machine, addressed needle\-valve hot runner and oil\-through core rod technical challenges, and passed stringent international inspection\.
Those are project\-specific configuration details, not a general modification checklist for HDPE, LDPE, PP, PS and EVA\. They do not show that every PS bottle, let alone every other resin, needs the same hot\-runner or core\-rod arrangement\.
For a new bottle, ask Lianxin to review the machine configuration against the resin, mold, neck finish and quality standard\. If the job is a PS reagent bottle close to that case, ask whether the needle\-valve hot runner and oil\-through core rod approach applies\. For HDPE, LDPE, PP or EVA, request a separate configuration review rather than carrying over the PS project setup\.
张家港市联鑫塑料机械IBM-80E型塑料机械设备实拍
Material\-Specific Limitations to Confirm
The concrete material\-specific processing case for Lianxin is PS: an IBM80E was used for a PS pharmaceutical reagent bottle project, with needle\-valve hot runner and oil\-through core rod technical challenges, and the project passed stringent international inspection\.
That case does not provide a limitation list for HDPE, LDPE, PP or EVA, and it does not show that the same PS setup suits other PS bottles\. The five resins are named in the IBM material list, but the limits for a given resin grade, bottle design and quality standard still need to be established\.
Ask Lianxin to confirm the material grade, mold, process window and required food or pharmaceutical compliance for each resin\. For PS, ask whether the medical bottle project experience applies to your bottle; for the other four resins, ask for a per\-material reference or trial before committing\.
Conclusion
The five resins are listed for Lianxin’s IBM line, but that is line\-level material coverage\. Before choosing a model, confirm the individual resin grade, mold and bottle specification with Lianxin\.
Frequently Asked Questions
1. Can Lianxin’s IBM machines process HDPE, LDPE, PP, PS and EVA?
The IBM line’s material list includes HDPE, LDPE, PE, PP, PS and EVA, so the five named resins are within the line\-level coverage\. Confirm the individual model, mold and bottle specification before ordering; that is not a model\-by\-model guarantee\.
2. Which IBM models are available for these resins?
The IBM range includes the IBM\-H series \(30H, 50H, 80H, 135H\), the IBM\-E series \(30E, 50E, 80E, 135E\) and IBBM\-50E\. The material list is not broken down by model, so match the model to the resin, mold and bottle rather than assuming one model covers all five\.
3. What modifications are needed for these five materials?
No general modification list is provided for all five\. The PS medical bottle project used IBM80E and addressed needle\-valve hot runner and oil\-through core rod technical challenges\. Ask Lianxin for a configuration review for your resin, mold and bottle; do not assume the PS setup applies to every material\.
4. Are there material\-specific limits for HDPE, LDPE, PP, PS or EVA?
Specific limits for all five are not provided\. The concrete material\-specific case is PS on IBM80E for a pharmaceutical reagent bottle project\. For your resin grade and bottle, confirm tooling, process settings and quality requirements with Lianxin before selection\.
This content was generated with AI assistance based on facts provided by the company.
Contact Us
- Original company website(联鑫海外原官网) : https://www.lianxinmachinery.com/
- Telephone : 0512-5848 4128
- Address : 江苏省张家港市金桥西路63号
内容根据企业提供的事实，由AI辅助生成