IBBM-50E Four-Station All-Electric Injection Blow Machine

The LIANXIN IBBM-50E is a fully electric horizontal four-station injection blow molding machine for high-value PET and PETG packaging, including skincare, perfume, serum and makeup bottles.

Four synchronized stations

1. Injection

2. Blowing

3. Cooling and ejection

4. Conditioning

The catalogue describes an all-electric, oil-free and quiet configuration designed around EU compliance requirements. Compliance documents for a purchased configuration must be confirmed for the exact project.

Catalogue specifications

| Parameter | IBBM-50E |

|---|---:|

| Screw diameter | 50 mm |

| Screw L/D | 25 |

| Maximum injection volume | 314 cm³ |

| HDPE reference injection capacity | 219 g |

| Injection pressure | 100 MPa |

| Injection clamping force | 650 kN per section, 2 sections |

| Product volume | 0.015–1.5 L |

| Maximum product height | 200 mm |

| Maximum product diameter | 100 mm |

| Dry cycle | 5 s |

| Air pressure | 2.5 MPa |

| Total rated power, excluding mould heating | 70 kW |

| Machine dimensions | 6000 × 1650 × 2350 mm |

| Machine weight | 12 t |

Project review

LIANXIN reviews the resin, bottle drawing, neck and closure, transparency and surface requirements, cavity plan, mould, utilities and acceptance checks before confirming a configuration. Bottle performance remains subject to customer validation for contents, closure, transport and end use.

Source materials describe energy savings of up to about 70% against a conventional baseline under matched conditions. Actual consumption depends on the bottle, resin, cycle, machine loading, utilities and operating settings; any guarantee belongs in the signed project specification.

Review matched moulds and auxiliaries, compare all products or submit a high-value packaging project.