BPET-125V4 One-Step Four-Station ISBM Machine
The LIANXIN BPET-125V4 is a one-step four-station machine with injection blow and injection stretch blow functions for larger one-step four-station projects with one to twelve cavities and catalogue bottle-volume references up to 5000 ml. Injection, conditioning, stretch/blow forming and ejection are coordinated within one machine.
Catalogue reference specifications
| Parameter | Catalogue reference |
|---|---:|
| Screw diameter | 60 mm |
| Screw L/D | 25 |
| Theoretical injection volume | 520 cm³ |
| Injection clamping force | 685 kN |
| Blow clamping force | 286 kN |
| Chilled-water demand | 80 L/min |
| Cooling-tower water | 200 L/min |
| Rated drive power | 65 kW / 380 V |
| Heater power | 12.5 kW / 220 V |
| Oil tank | 640 L |
| Machine dimensions | 5300 × 2100 × 3100 mm |
| Machine weight | 11.6 t |
| Maximum blow air | 3.5 MPa |
| Running air | 1 MPa |
Cavity and bottle-volume reference
| Cavities | Catalogue maximum bottle volume |
|---|---:|
| 1 | 5000 ml |
| 2 | 3000 ml |
| 3 | 2000 ml |
| 4 | 1000 ml |
| 5 | 800 ml |
| 6 | 600 ml |
| 7 | 450 ml |
| 8 | 400 ml |
| 9 | 300 ml |
| 10 | 250 ml |
| 11 | 200 ml |
| 12 | 100 ml |
These values are catalogue references, not output guarantees. Bottle geometry, neck design, resin, wall distribution, mould layout, utilities and acceptance criteria determine the final configuration.
Where BPET-125V4 fits
Review BPET-125V4 when the bottle requires more volume, more cavities, greater injection volume or higher clamping capacity than the BPET-70V4 reference envelope.
Materials and application review
Catalogue-listed materials include PET, PETG, PETE, high-transparent PP/PCTG, SAN, PC, PMMA, PS and BPA-free TRITAN. The machine can be reviewed for food, daily-chemical, pharmaceutical, personal-care, lubricant and specialty-chemical packaging, subject to bottle trials and customer package validation.
One-step process boundary
The one-step route forms the preform and bottle within one coordinated machine. The final choice between one-step and separate preform/reheat routes must be based on bottle requirements, material handling, production plan, utilities and validated project economics.
Information required for a BPET review
- Bottle drawing, neck finish and physical sample if available
- Approved resin and transparency or appearance target
- Bottle volume, weight and wall-distribution requirement
- Cavity plan and target output
- Cooling-water, compressed-air, voltage and space conditions
- Inspection, package validation and project documentation requirements
Questions about BPET-125V4
What is the largest published bottle-volume reference?
The largest value in the catalogue cavity matrix is 5000 ml at one cavity. More cavities reduce the listed maximum volume; the bottle still requires project review.
Can BPET-125V4 process every listed material without trials?
No. The approved resin grade, bottle design, mould, drying, process window and end-use validation must be reviewed together.
How is final output confirmed?
Output must be defined against the agreed bottle, resin, cavities, utilities, cycle and inspection criteria. Catalogue values alone do not create a production guarantee.
Review the BPET series, compare BPET-70V4 and BPET-125V4 or request a project review.