IBM-135H Electro-Hydraulic Hybrid-Servo Injection Blow Molding Machine
The LIANXIN IBM-135H is a electro-hydraulic hybrid-servo injection blow molding machine for the largest published IBM-H platform, with a 1153 cm³ catalogue injection volume and product-volume reference up to 1.5 L. Model selection must be confirmed from the bottle, resin, mould, cavities, target output and site utilities—not from model name alone.
Catalogue reference specifications
| Parameter | Catalogue reference |
|---|---:|
| Screw diameter | 70 mm |
| Screw L/D | 22 |
| Maximum injection volume | 1153 cm³ |
| HDPE reference injection capacity | 1000–1210 g |
| Injection pressure | 158 MPa |
| Injection clamping force | 1500 kN |
| Blow clamping force | 247 kN |
| Catalogue product-volume range | 0.015–1.5 L |
| Maximum product height | 285 mm |
| Maximum product diameter | 120 mm |
| Machine dimensions | 6.5 × 2.7 × 2.4 m |
| Machine weight | 18 t |
These figures are catalogue references, not a guaranteed production output. Final values and acceptance criteria belong in the controlled project specification.
Where IBM-135H fits in the series
The high-capacity IBM-H model to review when injection requirement, clamping demand or bottle volume is beyond IBM-80H. Its larger machine footprint and project utilities must be checked before selection.
Use the IBM-H family comparison to compare all published models before confirming a machine.
Materials and bottle review
Catalogue project materials for this family may include HDPE, LDPE, PE, PP, PS and EVA. Suitability depends on the approved resin grade, bottle geometry, neck finish, wall distribution, mould, cycle and required inspection. A published volume range does not confirm every bottle shape within that range.
Certification and evidence boundary
No CE scope is claimed for this model from another LIANXIN model or family. Request controlled compliance documents for the exact project configuration.
Information LIANXIN needs before configuration
- Bottle drawing or physical sample
- Approved resin grade
- Bottle volume, weight, height, diameter and neck finish
- Cavity plan and target output
- Appearance, wall-distribution, leak and closure criteria
- Site voltage, cooling water, compressed air and available space
- Required inspection, documentation and market qualification
Questions about IBM-135H
What bottle size can IBM-135H make?
The catalogue reference is 0.015–1.5 L, with a maximum product height of 285 mm and maximum product diameter of 120 mm. The actual bottle must be reviewed with its resin and mould.
Does the catalogue dry-cycle or capacity value guarantee output?
No. Output depends on bottle weight and geometry, resin, cavities, cooling, utilities, mould design, settings and acceptance criteria. A guaranteed output requires an agreed bottle trial and written acceptance method.
What should be compared before moving to another model?
Compare injection volume, reference injection capacity, clamping force, product envelope, mould arrangement, machine footprint and utilities—not bottle volume alone.
Review IBM-H machines, compare IBM-H and IBM-E or send a bottle drawing.